Home Window Security (part 2 of 2)
How Do I Install Home Window Security Film?
This post presumes you have decided that home window security film can be an important addition to your home.
And also you have made the decision on the solution that best fits your needs.
What to do now?
It’s time for you to focus on the installation process.
Listed here are the six necessary steps to set up your home window security film:
Home Window Security Film Step #1: Thoroughly clean the glass.
This is a critical first step as any kind of dirt that remains on your windows may get stuck under the film. You definitely need crystal clear glass before you start the set up process. Make sure to wipe the window dry with the cloth prior to moving forward to the next step.
Home Window Security Film Action #2: Calculate
Measure the window and cut the home window security film appropriately (1″ extra on every side is a safe bet). There is absolutely nothing more frustrating than to make a cut and later find oneself using a bit of home window security film that’s too small.
Home Window Security Film Step #3: Spray
Squirt both the window and also the glue side of the film with installation solution so that both are soaking wet and put on the window.
Home Window Security Film Step # 4: Peel the liner off the film.
Home window security film tends to crease easily, therefore manage it with caution. For bigger home windows, you should get yourself a companion to assist you.
Home Window Security Film Step # 5: Tack the film
Tack the film on the glass using the squeegee and trim the film. You are almost finished now.
Home Window Security Film Step #6: Implement the squeegee
Apply the Squeegee to the film once more, including the perimeters, to eliminate any excess water and air pockets. Wipe the edges dry using the cloth or paper towels.
Bingo! You’ve properly put in your home window security film!
Here are a few final thoughts and tips to make your home window security film installation go much more easily:
You should only film windows vertically, and not horizontally. You might believe it is a good idea to take the windowpane out of the frame and film it horizontally, but it’s not. This traps air bubbles beneath the film.
Pre-trim the film for arched or irregularly-shaped windows. It helps it be simpler to set up.
Choose an installation-friendly time of day and an equally desireable temperature. The ideal time for you to install window film is during morning hours or late evening (no strong sunlight, and also the windowpane is cooler), in temperature ranges of 45-90 degrees F.
Have patience. Installing window film, and especially pulling off the coating, requires a large amount of care. Take your time. You’ll be happy you did. You will have an effective home window security film that will safeguard you and your household for many years to come!